INTRODUCTION
PTSA or pTsOH or Tosylic acid (TsOH) is white solid organic compound, that is soluble in water, alcohols, and other polar organic solvents. The group is known as the tosyl group and is often abbreviated as Ts or Tos.
TsOH is about one million times stronger than benzoic acid. It is one of the few strong acids that is solid and hence conveniently weighed. It is available both in crystalline form as well as a solution and has a wide range of applications.
| Synonyms | 4-Methylbenzenesulfonic acid Tosic acid, Tosylic acid PTSA |
| CAS no. | 6192-52-5 (monohydrate) 104-15-4 (hydrous / solution) |
| EINECS no. | 203-180-0 |
| Molecular formula | C7H8SO3.H2O |
| Molecular weight | 190.22 |
| Structure |  |
APPLICATIONS
PTSA is widely used as a catalyst and as an intermediate in a variety of applications such as:
| A catalyst in the synthesis of pharmaceuticals, pesticides, polymerization stabilizer, paint intermediates, cross linking reactions and resin curing agent. It is also a commonly used acid catalyst in organic synthesis. |
| As an intermediate in fine chemicals, dyestuffs & pigments. |
| As a curing agent in thermosetting resin systems, varnishes, acrylic resins, etc. |
| As a hydrotropic coupling agent & a wetting agent in esterification / condensation / acetylation / polymerization / alkylation / hydrolysis / dehydration. |
| It is comparable in strength to mineral acids such as sulphuric acid but is especially suitable for organic reactions where an inorganic, mineral acid could cause charring, oxidation or an unwanted chemical reaction. |
SPECIFICATIONS
| Test | Unit | Specification |
|---|---|---|
| Appearance* | – | White crystalline powder |
| Assay on Monohydrate basis | % | Min 98 |
| P-isomer content in the active Material by a) HPLC method b) Others | % – | Min 92 Balance |
| Free Sulphuric Acid | % | Max 0.3 |
| Iron Content | ppm | Max 10.0 |
| Total Moisture | % | Max 11.50 |
| Melting Point | °C | Min 99 |
| Solubility in water | – | 100% soluble, clear solution |
*Note: The international specification of PTSA is white to off white to pink, though the material supplied would be white. However, as the product is highly hygroscopic – due to heat, sunlight and moisture the color may change from white to off white or pinkish in the course of time.
SPECIFICATIONS of 65% solution
| Test | Unit | Specification |
|---|---|---|
| Appearance | – | Pale yellow to amber colored liquid |
| Assay (on Anhydrous basis) | % | Min 65.0 |
| Free Sulphuric acid | % | Max 1.0 |
| Specific gravity (at 25°C) | – | 1.22 ± 0.02 |
REACH status
PTSA offered by ExSyn is registered under EU REACH regulation.
STORAGE
The product is stored at ambient temperature.
ExSyn can offer PTSA grades as low as 0.1% free sulfuric acid, resulting in lower corrosion of user’s equipment and can also offer customized specifications if needed.
No matter the quantity you need, our exceptional quality and service will make ExSyn your supplier of choice! If you need any additional information or SDS, please get in touch with us.
Guanidine carbonate is a white, crystalline, water-soluble compound with an alkaline and ionic nature. Composed of guanidinium cations and carbonate anions, it offers chemical stability, buffering capacity, and good formulation compatibility. In textile applications, it is used in formulations and fabric treatments for its thickening, softening, lubricating, anti-static, and flame-retardant properties, contributing to improved fabric finish and performance.
Tin(II) sulfide (SnS) has emerged as a safe and sustainable semiconductor owing to its non-toxicity, low cost, and natural abundance. It has attracted significant interest for solar energy conversion in thin-film photovoltaic devices because of its suitable band gap, which is approximately 1.3 eV in the orthorhombic phase and 1.5-1.7 eV in the cubic phase. In addition to photovoltaic applications, SnS is used in solid-state lubricants, near-infrared detectors, Lithium-ion batteries, and various sensing devices.
Nikethamide is a synthetic organic compound derived from nicotinic acid (vitamin B₃). It consists of a pyridine ring linked to a diethyl amide functional group and belongs to the class of pyridine amide derivatives.
(2-Methoxy-1-methyl-2-oxoethyl)triphenylphosphonium bromide is a stabilized phosphonium salt widely used as an intermediate in organic synthesis. Due to presence of an ester group, the compound generates a stabilized ylide that is particularly useful for synthesizing α, β-unsaturated esters, valuable intermediates in pharmaceuticals, agrochemicals, fragrances, and fine chemicals.
p-tert-Butylphenol (PTBP), is an aromatic organic compound consists of a phenol ring substituted with a tert-butyl group at the para (4-) position, giving it improved thermal stability and hydrophobic properties compared to phenol. PTBP features significant hydrogen bonding capabilities, which enhance its solubility in organic solvents. PTBP is used primarily as an intermediate in the manufacturing of polycarbonate plastics, phenolic resins, and epoxy resins.
Yttrium oxide (Y2O3), also known as yttria, is an air-stable, odorless white powder. It is a highly stable, chemically inert ceramic with a very high melting point. It is insoluble in water but readily dissolves in most strong acids. Increasing the specific surface area and porosity of Y2O3 can further improve its relevant physical and chemical properties.
Ethyl 7,7,7-trifluoro-3-hydroxy-3-methylheptanoate is a fluorinated aliphatic hydroxy ester. The presence of the trifluoromethyl group imparts enhanced metabolic stability, lipophilicity, and unique physicochemical properties compared with non-fluorinated analogues. This compound is primarily used as a synthetic intermediate in pharmaceutical and agrochemical research.
2-Chloro-1,1,1-trimethoxyethane is an organochlorine orthoester compound commonly used as a versatile synthetic intermediate in organic and pharmaceutical chemistry. It is a colorless to pale yellow liquid with good reactivity toward nucleophilic substitution and cyclization reactions, making it valuable in the preparation of heterocyclic and bioactive molecules.
Glycolaldehyde dimer is the cyclic dimeric form of glycolaldehyde, the simplest hydroxyaldehyde. Glycolaldehyde is often supplied as stable dimeric solid, commonly identified as 2,5-dihydroxy-1,4-dioxane.